/dts-v1/;

/ {
	model = "Amlogic";
	compatible = "amlogic, gxl";
	amlogic-dt-id = "gxlx2_p291_2g";
	interrupt-parent = <0x02>;
	#address-cells = <0x02>;
	#size-cells = <0x02>;

	mali@d00c0000 {
		#cooling-cells = <0x02>;
		compatible = "arm,mali-450";
		interrupt-parent = <0x02>;
		reg = <0x00 0xd00c0000 0x00 0x40000 0x00 0xc883c000 0x00 0x04 0x00 0xc8100000 0x00 0x04 0x00 0xc883c000 0x00 0x100 0x00 0xc1104440 0x00 0x100>;
		interrupts = <0x00 0xa0 0x04 0x00 0xa1 0x04 0x00 0xa2 0x04 0x00 0xa3 0x04 0x00 0xa4 0x04 0x00 0xa5 0x04 0x00 0xa6 0x04 0x00 0xa7 0x04>;
		interrupt-names = "IRQGP\0IRQGPMMU\0IRQPP\0IRQPMU\0IRQPP0\0IRQPPMMU0\0IRQPP1\0IRQPPMMU1";
		pmu_domain_config = <0x01 0x02 0x04 0x00 0x00 0x00 0x00 0x00 0x00 0x01 0x02 0x00>;
		pmu_switch_delay = <0xffff>;
		num_of_pp = <0x02>;
		def_clock = <0x03>;
		sc_mpp = <0x02>;
		tbl = <0x03 0x04 0x05 0x07 0x08 0x08>;
		clocks = <0x09 0x08 0x09 0x09 0x09 0x11 0x09 0x12 0x09 0x1e 0x09 0x15 0x09 0x13 0x09 0x14>;
		clock-names = "fclk_div3\0fclk_div4\0fclk_div5\0fclk_div7\0gp0_pll\0clk_mali\0clk_mali_0\0clk_mali_1";
		control_interval = <0xc8>;

		clk125_cfg {
			clk_freq = <0x7735940>;
			clk_parent = "fclk_div4";
			clkp_freq = <0x1dcd6500>;
			voltage = <0x47e>;
			keep_count = <0x05>;
			threshold = <0x1e 0x78>;
			linux,phandle = <0x03>;
			phandle = <0x03>;
		};

		clk250_cfg {
			clk_freq = <0xee6b280>;
			clk_parent = "fclk_div4";
			clkp_freq = <0x1dcd6500>;
			voltage = <0x47e>;
			keep_count = <0x05>;
			threshold = <0x50 0xaa>;
		};

		clk285_cfg {
			clk_freq = <0x10fcc140>;
			clk_parent = "fclk_div7";
			clkp_freq = <0x10fcc140>;
			voltage = <0x47e>;
			keep_count = <0x05>;
			threshold = <0x64 0xbe>;
			linux,phandle = <0x04>;
			phandle = <0x04>;
		};

		clk400_cfg {
			clk_freq = <0x17d78400>;
			clk_parent = "fclk_div5";
			clkp_freq = <0x17d78400>;
			voltage = <0x47e>;
			keep_count = <0x05>;
			threshold = <0x98 0xcf>;
			linux,phandle = <0x05>;
			phandle = <0x05>;
		};

		clk500_cfg {
			clk_freq = <0x1dcd6500>;
			clk_parent = "fclk_div4";
			clkp_freq = <0x1dcd6500>;
			voltage = <0x47e>;
			keep_count = <0x05>;
			threshold = <0xb4 0xdc>;
			linux,phandle = <0x07>;
			phandle = <0x07>;
		};

		clk666_cfg {
			clk_freq = <0x27b25a80>;
			clk_parent = "fclk_div3";
			clkp_freq = <0x27b25a80>;
			voltage = <0x47e>;
			keep_count = <0x05>;
			threshold = <0xd2 0xec>;
			linux,phandle = <0x08>;
			phandle = <0x08>;
		};

		clk750_cfg {
			clk_freq = <0x2c588a00>;
			clk_parent = "gp0_pll";
			clkp_freq = <0x2c588a00>;
			voltage = <0x47e>;
			keep_count = <0x05>;
			threshold = <0xe6 0xff>;
		};

		clk800_cfg {
			clk_freq = <0x2f34f600>;
			clk_parent = "gp0_pll";
			clkp_freq = <0x2f34f600>;
			voltage = <0x47e>;
			keep_count = <0x05>;
			threshold = <0xe6 0xff>;
		};
	};

	cpus {
		#address-cells = <0x02>;
		#size-cells = <0x00>;
		#cooling-cells = <0x02>;

		cpu@0 {
			device_type = "cpu";
			compatible = "arm,cortex-a53\0arm,armv8";
			reg = <0x00 0x00>;
			enable-method = "psci";
		};

		cpu@1 {
			device_type = "cpu";
			compatible = "arm,cortex-a53\0arm,armv8";
			reg = <0x00 0x01>;
			enable-method = "psci";
		};

		cpu@2 {
			device_type = "cpu";
			compatible = "arm,cortex-a53\0arm,armv8";
			reg = <0x00 0x02>;
			enable-method = "psci";
		};

		cpu@3 {
			device_type = "cpu";
			compatible = "arm,cortex-a53\0arm,armv8";
			reg = <0x00 0x03>;
			enable-method = "psci";
		};
	};

	timer {
		compatible = "arm,armv8-timer";
		interrupts = <0x01 0x0d 0xff01 0x01 0x0e 0xff01 0x01 0x0b 0xff01 0x01 0x0a 0xff01>;
	};

	arm_pmu {
		compatible = "arm,armv8-pmuv3";
		interrupts = <0x00 0x89 0x04 0x00 0x8a 0x04 0x00 0x99 0x04 0x00 0x9a 0x04>;
	};

	pm {
		compatible = "amlogic, pm";
		device_name = "aml_pm";
		gxbaby-suspend;
		reg = <0x00 0xc81000a8 0x00 0x04 0x00 0xc810023c 0x00 0x04>;
	};

	interrupt-controller@2c001000 {
		compatible = "arm,cortex-a15-gic\0arm,cortex-a9-gic";
		#interrupt-cells = <0x03>;
		#address-cells = <0x00>;
		interrupt-controller;
		reg = <0x00 0xc4301000 0x00 0x1000 0x00 0xc4302000 0x00 0x100>;
		interrupts = <0x01 0x09 0xf04>;
		linux,phandle = <0x02>;
		phandle = <0x02>;
	};

	aml_restart {
		compatible = "aml, restart";
		sys_reset = <0x84000009>;
		sys_poweroff = <0x84000008>;
	};

	psci {
		compatible = "arm,psci";
		method = "smc";
		cpu_suspend = <0xc4000001>;
		cpu_off = <0x84000002>;
		cpu_on = <0xc4000003>;
		migrate = <0xc4000005>;
	};

	secmon {
		compatible = "amlogic, secmon";
		memory-region = <0x0a>;
		in_base_func = <0x82000020>;
		out_base_func = <0x82000021>;
	};

	securitykey {
		compatible = "aml, securitykey";
		storage_query = <0x82000060>;
		storage_read = <0x82000061>;
		storage_write = <0x82000062>;
		storage_tell = <0x82000063>;
		storage_verify = <0x82000064>;
		storage_status = <0x82000065>;
		storage_list = <0x82000067>;
		storage_remove = <0x82000068>;
		storage_in_func = <0x82000023>;
		storage_out_func = <0x82000024>;
		storage_block_func = <0x82000025>;
		storage_size_func = <0x82000027>;
	};

	cpu_iomap {
		compatible = "amlogic, iomap";
		#address-cells = <0x02>;
		#size-cells = <0x02>;
		ranges;

		io_cbus_base {
			reg = <0x00 0xc1100000 0x00 0x100000>;
		};

		io_apb_base {
			reg = <0x00 0xd0000000 0x00 0x200000>;
		};

		io_aobus_base {
			reg = <0x00 0xc8100000 0x00 0x100000>;
		};
	};

	cpufreq-meson {
		compatible = "amlogic, cpufreq-scpi";
		status = "okay";
		clocks = <0x0b 0x00>;
		clock-names = "cpu_clk";
	};

	amlogic-watchdog {
		compatible = "amlogic, gx-wdt";
		status = "disable";
		default_timeout = <0x0a>;
		reset_watchdog_method = <0x01>;
		reset_watchdog_time = <0x02>;
		shutdown_timeout = <0x0a>;
		firmware_timeout = <0x06>;
		suspend_timeout = <0x06>;
		reg = <0x00 0xc11098d0 0x00 0x10>;
		clocks = <0x09 0x02>;
	};

	amlogic-jtag {
		compatible = "amlogic, jtag";
		status = "okay";
		pinctrl-names = "jtag_apao_pins\0jtag_apee_pins";
		pinctrl-0 = <0x0c>;
		pinctrl-1 = <0x0d>;
	};

	meson_clock {
		compatible = "amlogic, gxl-clock";
		reg = <0x00 0xc883c000 0x00 0x1000 0x00 0xc8100000 0x00 0x1000>;
		#clock-cells = <0x01>;
		#reset-cells = <0x01>;
		sys_max = <0x5b8d8000>;
		linux,phandle = <0x09>;
		phandle = <0x09>;
	};

	cpu_info {
		compatible = "amlogic, cpuinfo";
		cpuinfo_cmd = <0x82000044>;
	};

	pinmux {
		compatible = "amlogic, pinmux-gxl";
		dev_name = "pinmux";
		#pinmux-cells = <0x02>;
		#address-cells = <0x02>;
		#size-cells = <0x02>;
		reg = <0x00 0xc1109880 0x00 0x10>;
		ranges;

		banks@c11080b0 {
			reg = <0x00 0xc88344b0 0x00 0x28 0x00 0xc88344e8 0x00 0x14 0x00 0xc8834520 0x00 0x14 0x00 0xc8834430 0x00 0x40>;
			reg-names = "mux\0pull\0pull-enable\0gpio";
			gpio-controller;
			#gpio-cells = <0x02>;
			linux,phandle = <0x1a>;
			phandle = <0x1a>;
		};

		ao-bank@c1108030 {
			reg = <0x00 0xc8100014 0x00 0x08 0x00 0xc810002c 0x00 0x04 0x00 0xc8100024 0x00 0x08>;
			reg-names = "mux\0pull\0gpio";
			gpio-controller;
			#gpio-cells = <0x02>;
			linux,phandle = <0x10>;
			phandle = <0x10>;
		};

		eth_pins {
			amlogic,setmask = <0x04 0x3000000>;
			amlogic,clrmask = <0x03 0x300000>;
			amlogic,pins = "GPIOZ_14\0GPIOZ_15";
			linux,phandle = <0x20>;
			phandle = <0x20>;
		};

		jtag_apao_pin {
			amlogic,clrmask = <0x06 0x7fe0000>;
			amlogic,pins = "GPIOH_6\0GPIOH_7\0GPIOH_8\0GPIOH_9";
			linux,phandle = <0x0c>;
			phandle = <0x0c>;
		};

		jtag_apee_pin {
			amlogic,clrmask = <0x06 0x3c>;
			amlogic,pins = "CARD_0\0CARD_1\0CARD_2\0CARD_3";
			linux,phandle = <0x0d>;
			phandle = <0x0d>;
		};

		remote_pin {
			amlogic,setmask = <0x10 0x01>;
			amlogic,pins = "GPIOAO_7";
			linux,phandle = <0x19>;
			phandle = <0x19>;
		};

		ao_uart {
			amlogic,setmask = <0x10 0x1800>;
			amlogic,pins = "GPIOAO_0\0GPIOAO_1";
		};

		ao_b_uart {
			amlogic,setmask = <0x10 0x1800000>;
			amlogic,pins = "GPIOAO_4\0GPIOAO_5";
			linux,phandle = <0x5e>;
			phandle = <0x5e>;
		};

		a_uart {
			amlogic,setmask = <0x05 0xf0000>;
			amlogic,clrmask = <0x05 0x3c0>;
			amlogic,pins = "GPIOX_12\0GPIOX_13\0GPIOX_14\0GPIOX_15";
			linux,phandle = <0x5b>;
			phandle = <0x5b>;
		};

		b_uart {
			amlogic,setmask = <0x02 0x18000>;
			amlogic,pins = "GPIODV_24\0GPIODV_25";
			linux,phandle = <0x5c>;
			phandle = <0x5c>;
		};

		c_uart {
			amlogic,setmask = <0x05 0x3000>;
			amlogic,pins = "GPIOX_8\0GPIOX_9";
			linux,phandle = <0x5d>;
			phandle = <0x5d>;
		};

		wifi_32k_pins {
			amlogic,setmask = <0x05 0x8000>;
			amlogic,pins = "GPIOX_16";
			linux,phandle = <0x26>;
			phandle = <0x26>;
		};

		sd_clk_cmd_pins {
			amlogic,setmask = <0x06 0x0c 0x10 0x1800>;
			amlogic,pins = "CARD_2\0CARD_3";
			amlogic,enable-output = <0x01>;
			amlogic,pullup = <0x01>;
			amlogic,pullupen = <0x01>;
			linux,phandle = <0x2b>;
			phandle = <0x2b>;
		};

		sd_all_pins {
			amlogic,setmask = <0x06 0x3f 0x10 0x1800>;
			amlogic,clrmask = <0x06 0xfc0>;
			amlogic,pins = "CARD_0\0CARD_1\0CARD_2\0CARD_3\0CARD_4\0CARD_5";
			amlogic,enable-output = <0x01>;
			amlogic,pullup = <0x01>;
			amlogic,pullupen = <0x01>;
			linux,phandle = <0x2c>;
			phandle = <0x2c>;
		};

		sd_clear_all_pin {
			amlogic,setmask = <0x10 0x1800>;
			amlogic,clrmask = <0x06 0x3f 0x06 0xfc0>;
			amlogic,pins = "GPIOAO_0\0GPIOAO_1";
			amlogic,enable-output = <0x01>;
			amlogic,pullup = <0x01>;
			amlogic,pullupen = <0x01>;
			linux,phandle = <0x34>;
			phandle = <0x34>;
		};

		sd_1bit_pins {
			amlogic,setmask = <0x06 0x1c 0x10 0x1800>;
			amlogic,clrmask = <0x06 0xcc3>;
			amlogic,pins = "CARD_1\0CARD_2\0CARD_3";
			amlogic,enable-output = <0x01>;
			amlogic,pullup = <0x01>;
			amlogic,pullupen = <0x01>;
			linux,phandle = <0x2d>;
			phandle = <0x2d>;
		};

		sd_clk_cmd_uart_pins {
			amlogic,setmask = <0x06 0x30c>;
			amlogic,clrmask = <0x06 0xcc3 0x10 0x1800>;
			amlogic,pins = "CARD_2\0CARD_3";
			amlogic,enable-output = <0x01>;
			amlogic,pullup = <0x01>;
			amlogic,pullupen = <0x01>;
			linux,phandle = <0x2e>;
			phandle = <0x2e>;
		};

		sd_1bit_uart_pins {
			amlogic,setmask = <0x06 0x31c>;
			amlogic,clrmask = <0x06 0xcc3 0x10 0x1800>;
			amlogic,pins = "CARD_1\0CARD_2\0CARD_3";
			amlogic,enable-output = <0x01>;
			amlogic,pullup = <0x01>;
			amlogic,pullupen = <0x01>;
			linux,phandle = <0x2f>;
			phandle = <0x2f>;
		};

		sd_to_ao_uart_pins {
			amlogic,setmask = <0x10 0x1800>;
			amlogic,clrmask = <0x06 0x300>;
			amlogic,pins = "GPIOAO_0\0GPIOAO_1";
			amlogic,enable-output = <0x01>;
			amlogic,pullup = <0x01>;
			amlogic,pullupen = <0x01>;
			linux,phandle = <0x30>;
			phandle = <0x30>;
		};

		ao_to_sd_uart_pins {
			amlogic,setmask = <0x06 0x300>;
			amlogic,clrmask = <0x10 0x1800 0x06 0xcc3>;
			amlogic,pins = "CARD_4\0CARD_5";
			amlogic,enable-output = <0x01>;
			amlogic,pullup = <0x01>;
			amlogic,pullupen = <0x01>;
			linux,phandle = <0x31>;
			phandle = <0x31>;
		};

		ao_to_sd_jtag_pins {
			amlogic,setmask = <0x06 0x300>;
			amlogic,clrmask = <0x06 0xcff 0x10 0x1800>;
			amlogic,pins = "CARD_4\0CARD_5";
			amlogic,enable-output = <0x01>;
			amlogic,pullup = <0x01>;
			amlogic,pullupen = <0x01>;
			linux,phandle = <0x32>;
			phandle = <0x32>;
		};

		sd_to_ao_jtag_pins {
			amlogic,setmask = <0x10 0x1800>;
			amlogic,clrmask = <0x06 0xfc0>;
			amlogic,pins = "GPIOAO_0\0GPIOAO_1";
			amlogic,enable-output = <0x01>;
			amlogic,pullup = <0x01>;
			amlogic,pullupen = <0x01>;
			linux,phandle = <0x33>;
			phandle = <0x33>;
		};

		emmc_conf_pull_up {
			amlogic,pins = "BOOT_0\0BOOT_1\0BOOT_2\0BOOT_3\0BOOT_4\0BOOT_5\0BOOT_6\0BOOT_7\0BOOT_8\0BOOT_10";
			amlogic,pullup = <0x01>;
			amlogic,pullupen = <0x01>;
			linux,phandle = <0x28>;
			phandle = <0x28>;
		};

		emmc_conf_pull_done {
			amlogic,pins = "BOOT_15";
			amlogic,pullup = <0x00>;
			amlogic,pullupen = <0x01>;
			linux,phandle = <0x29>;
			phandle = <0x29>;
		};

		emmc_clk_cmd_pins {
			amlogic,setmask = <0x07 0x60000000>;
			amlogic,clrmask = <0x07 0xe0>;
			amlogic,pins = "BOOT_8\0BOOT_10";
			amlogic,enable-output = <0x01>;
			amlogic,pullup = <0x01>;
			amlogic,pullupen = <0x01>;
			linux,phandle = <0x27>;
			phandle = <0x27>;
		};

		emmc_all_pins {
			amlogic,setmask = <0x07 0xf0000000>;
			amlogic,clrmask = <0x07 0xe0>;
			amlogic,pins = "BOOT_0\0BOOT_1\0BOOT_2\0BOOT_3\0BOOT_4\0BOOT_5\0BOOT_6\0BOOT_7\0BOOT_8\0BOOT_10\0BOOT_15";
			amlogic,enable-output = <0x01>;
			linux,phandle = <0x2a>;
			phandle = <0x2a>;
		};

		sdio_clk_cmd_pins {
			amlogic,setmask = <0x05 0xc000000>;
			amlogic,pins = "GPIOX_4\0GPIOX_5";
			amlogic,enable-output = <0x01>;
			amlogic,pullup = <0x01>;
			amlogic,pullupen = <0x01>;
			linux,phandle = <0x35>;
			phandle = <0x35>;
		};

		sdio_all_pins {
			amlogic,setmask = <0x05 0xfc000000>;
			amlogic,pins = "GPIOX_0\0GPIOX_1\0GPIOX_2\0GPIOX_3\0GPIOX_4\0GPIOX_5";
			amlogic,enable-output = <0x01>;
			amlogic,pullup = <0x01>;
			amlogic,pullupen = <0x01>;
			linux,phandle = <0x36>;
			phandle = <0x36>;
		};

		conf_nand_pulldown {
			amlogic,pins = "BOOT_0\0BOOT_1\0BOOT_2\0BOOT_3\0BOOT_4\0BOOT_5\0BOOT_6\0BOOT_7\0BOOT_15";
			amlogic,pullup = <0x00>;
			amlogic,pullupen = <0x01>;
			linux,phandle = <0x37>;
			phandle = <0x37>;
		};

		conf_nand_pullup {
			amlogic,pins = "BOOT_8\0BOOT_10";
			amlogic,pullup = <0x01>;
			amlogic,pullupen = <0x01>;
			linux,phandle = <0x38>;
			phandle = <0x38>;
		};

		all_nand_pins {
			amlogic,setmask = <0x07 0x800000ff>;
			amlogic,clrmask = <0x07 0x70ffbc00>;
			amlogic,pins = "BOOT_0\0BOOT_1\0BOOT_2\0BOOT_3\0BOOT_4\0BOOT_5\0BOOT_6\0BOOT_7\0BOOT_8\0BOOT_9\0BOOT_10\0BOOT_11\0BOOT_12\0BOOT_13\0BOOT_14\0BOOT_15";
			amlogic,enable-output = <0x01>;
			linux,phandle = <0x39>;
			phandle = <0x39>;
		};

		nand_cs {
			amlogic,setmask = <0x07 0xc0>;
			amlogic,clrmask = <0x07 0x40040000>;
			amlogic,pins = "BOOT_8\0BOOT_9";
			linux,phandle = <0x3a>;
			phandle = <0x3a>;
		};

		hdmitx_hpd {
			amlogic,setmask = <0x06 0x80000000>;
			amlogic,pins = "GPIOH_0";
			linux,phandle = <0x57>;
			phandle = <0x57>;
		};

		hdmitx_ddc {
			amlogic,setmask = <0x06 0x30000000>;
			amlogic,pins = "GPIOH_1\0GPIOH_2";
			linux,phandle = <0x58>;
			phandle = <0x58>;
		};

		hdmitx_aocec {
			amlogic,setmask = <0x10 0x8000>;
			amlogic,clrmask = <0x10 0x24000 0x11 0x01>;
			amlogic,pins = "GPIOAO_8";
			linux,phandle = <0x5a>;
			phandle = <0x5a>;
		};

		hdmitx_eecec {
			amlogic,setmask = <0x10 0x4000>;
			amlogic,clrmask = <0x10 0x28000 0x11 0x01>;
			amlogic,pins = "GPIOAO_8";
		};

		a_i2c {
			amlogic,setmask = <0x01 0xc000>;
			amlogic,clrmask = <0x03 0x18 0x02 0x18000 0x02 0xc0 0x01 0x600000>;
			amlogic,pins = "GPIODV_24\0GPIODV_25";
			linux,phandle = <0x0e>;
			phandle = <0x0e>;
		};

		b_i2c {
			amlogic,setmask = <0x01 0x3000>;
			amlogic,clrmask = <0x02 0x6000 0x01 0x1c0000>;
			amlogic,pins = "GPIODV_26\0GPIODV_27";
			linux,phandle = <0x0f>;
			phandle = <0x0f>;
		};

		c_i2c {
			amlogic,setmask = <0x01 0xc00>;
			amlogic,clrmask = <0x02 0x1800 0x01 0x200 0x02 0x20>;
			amlogic,pins = "GPIODV_28\0GPIODV_29";
			linux,phandle = <0x11>;
			phandle = <0x11>;
		};

		d_i2c {
			amlogic,setmask = <0x05 0x30>;
			amlogic,clrmask = <0x05 0x300c03>;
			amlogic,pins = "GPIOX_10\0GPIOX_11";
			linux,phandle = <0x12>;
			phandle = <0x12>;
		};

		spicc_pins_z11z12z13 {
			amlogic,setmask = <0x04 0x1c>;
			amlogic,clrmask = <0x03 0x800 0x04 0x1c00>;
			amlogic,pins = "GPIOZ_11\0GPIOZ_12\0GPIOZ_13";
		};

		spicc_pulldown_z11z12z13 {
			amlogic,pins = "GPIOZ_11\0GPIOZ_12\0GPIOZ_13";
			amlogic,pullup = <0x00>;
			amlogic,pullupen = <0x01>;
		};

		spicc_pullup_z11z12z13 {
			amlogic,pins = "GPIOZ_11\0GPIOZ_12\0GPIOZ_13";
			amlogic,pullup = <0x01>;
			amlogic,pullupen = <0x01>;
		};

		spicc_pins_x8x9x11 {
			amlogic,setmask = <0x05 0x0d>;
			amlogic,clrmask = <0x05 0xd03430 0x06 0x0d>;
			amlogic,pins = "GPIOX_8\0GPIOX_9\0GPIOX_11";
		};

		spicc_pulldown_x8x9x11 {
			amlogic,pins = "GPIOX_8\0GPIOX_9\0GPIOX_11";
			amlogic,pullup = <0x00>;
			amlogic,pullupen = <0x01>;
		};

		spicc_pullup_x8x9x11 {
			amlogic,pins = "GPIOX_8\0GPIOX_9\0GPIOX_11";
			amlogic,pullup = <0x01>;
			amlogic,pullupen = <0x01>;
		};

		audio_pin {
			amlogic,setmask = <0x06 0x7800000>;
			amlogic,clrmask = <0x06 0x7e0000>;
			amlogic,pins = "GPIOH_6\0GPIOH_7\0GPIOH_8\0GPIOH_9";
			linux,phandle = <0x63>;
			phandle = <0x63>;
		};

		audio_pin1 {
			amlogic,setmask = <0x06 0x10000000>;
			amlogic,clrmask = <0x06 0x8000000>;
			amlogic,pins = "GPIOH_4";
			linux,phandle = <0x62>;
			phandle = <0x62>;
		};

		audio_btpcm_pins {
			amlogic,setmask = <0x05 0xf00000>;
			amlogic,clrmask = <0x05 0x3c33>;
			amlogic,pins = "GPIOX_8\0GPIOX_9\0GPIOX_10\0GPIOX_11";
			linux,phandle = <0x61>;
			phandle = <0x61>;
		};

		pwm_ao_a_pins {
			amlogic,setmask = <0x10 0x400000>;
			amlogic,clrmask = <0x10 0x280>;
			amlogic,pins = "GPIOAO_3";
			linux,phandle = <0x1c>;
			phandle = <0x1c>;
		};
	};

	cpu_version {
		reg = <0x00 0xc8100220 0x00 0x04>;
	};

	meson_clk_msr {
		compatible = "amlogic, gxl_measure";
		reg = <0x00 0xc110875c 0x00 0x04 0x00 0xc1108764 0x00 0x04>;
	};

	ddr_bandwidth {
		compatible = "amlogic, ddr-bandwidth";
		status = "okay";
		reg = <0x00 0xc8838000 0x00 0x100 0x00 0xc8837000 0x00 0x100>;
		interrupts = <0x00 0x34 0x01>;
		interrupt-names = "ddr_bandwidth";
	};

	dmc_monitor {
		compatible = "amlogic, dmc_monitor";
		status = "okay";
		reg_base = <0xda838400>;
		interrupts = <0x00 0x33 0x01>;
	};

	i2c@c1108500 {
		compatible = "amlogic, meson-i2c";
		dev_name = "i2c-A";
		status = "disabled";
		reg = <0x00 0xc1108500 0x00 0x20>;
		device_id = <0x01>;
		pinctrl-names = "default";
		pinctrl-0 = <0x0e>;
		#address-cells = <0x01>;
		#size-cells = <0x00>;
		use_pio = <0x00>;
		master_i2c_speed = <0x493e0>;
		clocks = <0x09 0x0a>;
		clock-names = "clk_i2c";
		resets = <0x09 0x09>;
	};

	i2c@c11087c0 {
		compatible = "amlogic, meson-i2c";
		dev_name = "i2c-B";
		status = "disabled";
		reg = <0x00 0xc11087c0 0x00 0x20>;
		device_id = <0x02>;
		pinctrl-names = "default";
		pinctrl-0 = <0x0f>;
		#address-cells = <0x01>;
		#size-cells = <0x00>;
		use_pio = <0x00>;
		master_i2c_speed = <0x493e0>;
		clocks = <0x09 0x0a>;
		clock-names = "clk_i2c";
		resets = <0x09 0x09>;

		ntag_i2c@55 {
			compatible = "nxp,ntag_i2c";
			reg = <0x55>;
			clock-frequency = <0x61a80>;
			interrupt-gpios = <0x10 0x02 0x00>;
			irq_fall = <0x01>;
			irq_rise = <0x02>;
			interrupts = <0x00 0x41 0x01 0x00 0x42 0x01>;
		};

		pn547@28 {
			compatible = "nxp,pn547";
			reg = <0x28>;
			clock-frequency = <0x61a80>;
			interrupt-gpios = <0x10 0x06 0x00>;
			enable-gpios = <0x10 0x05 0x00>;
			switch-gpios = <0x10 0x09 0x00>;
			gpioirq = <0x00>;
			interrupts = <0x00 0x40 0x01>;
		};
	};

	i2c@c11087e0 {
		compatible = "amlogic, meson-i2c";
		dev_name = "i2c-C";
		status = "disabled";
		reg = <0x00 0xc11087e0 0x00 0x20>;
		device_id = <0x03>;
		pinctrl-names = "default";
		pinctrl-0 = <0x11>;
		#address-cells = <0x01>;
		#size-cells = <0x00>;
		use_pio = <0x00>;
		master_i2c_speed = <0x493e0>;
		clocks = <0x09 0x0a>;
		clock-names = "clk_i2c";
		resets = <0x09 0x09>;
	};

	i2c@c1108d20 {
		compatible = "amlogic, meson-i2c";
		dev_name = "i2c-D";
		status = "disabled";
		reg = <0x00 0xc1108d20 0x00 0x20>;
		device_id = <0x04>;
		pinctrl-names = "default";
		pinctrl-0 = <0x12>;
		#address-cells = <0x01>;
		#size-cells = <0x00>;
		use_pio = <0x00>;
		master_i2c_speed = <0x493e0>;
		clocks = <0x09 0x0a>;
		clock-names = "clk_i2c";
		resets = <0x09 0x09>;
	};

	efuse {
		compatible = "amlogic, efuse";
		read_cmd = <0x82000030>;
		write_cmd = <0x82000031>;
		get_max_cmd = <0x82000033>;
		key = <0x13>;
		resets = <0x09 0x3e>;
		reset-names = "efuse_clk";
		status = "okay";
	};

	efusekey {
		keynum = <0x04>;
		key0 = <0x14>;
		key1 = <0x15>;
		key2 = <0x16>;
		key3 = <0x17>;
		linux,phandle = <0x13>;
		phandle = <0x13>;

		key0 {
			keyname = "mac";
			offset = <0x00>;
			size = <0x06>;
			linux,phandle = <0x14>;
			phandle = <0x14>;
		};

		key1 {
			keyname = "mac_bt";
			offset = <0x06>;
			size = <0x06>;
			linux,phandle = <0x15>;
			phandle = <0x15>;
		};

		key2 {
			keyname = "mac_wifi";
			offset = <0x0c>;
			size = <0x06>;
			linux,phandle = <0x16>;
			phandle = <0x16>;
		};

		key3 {
			keyname = "usid";
			offset = <0x12>;
			size = <0x10>;
			linux,phandle = <0x17>;
			phandle = <0x17>;
		};
	};

	mhu@c883c400 {
		compatible = "amlogic, meson_mhu";
		reg = <0x00 0xc883c400 0x00 0x4c 0x00 0xc8013000 0x00 0x800>;
		interrupts = <0x00 0xd1 0x08 0x00 0xd2 0x08>;
		#mbox-cells = <0x01>;
		mbox-names = "cpu_to_scp_low\0cpu_to_scp_high";
		mboxes = <0x18 0x00 0x18 0x01>;
		linux,phandle = <0x18>;
		phandle = <0x18>;
	};

	scpi_clocks {
		compatible = "arm,scpi-clks";

		scpi_clocks@0 {
			compatible = "arm,scpi-clk-indexed";
			#clock-cells = <0x01>;
			clock-indices = <0x00>;
			clock-output-names = "vcpu";
			linux,phandle = <0x0b>;
			phandle = <0x0b>;
		};
	};

	meson_remote {
		compatible = "amlogic, aml_remote";
		dev_name = "meson-remote";
		status = "ok";
		remote_ao_offset = <0x580>;
		interrupts = <0x00 0xc4 0x01>;
		pinctrl-names = "default";
		pinctrl-0 = <0x19>;
		led_status_on = <0x00>;
		led_pin = <0x1a 0x49 0x00>;
	};

	rng {
		compatible = "amlogic,meson-rng";
		reg = <0x00 0xc8834000 0x00 0x04>;
	};

	audio_data {
		compatible = "amlogic, audio_data";
		query_licence_cmd = <0x82000050>;
		status = "okay";
	};

	saradc {
		compatible = "amlogic, saradc";
		status = "okay";
		interrupts = <0x00 0x09 0x01>;
		interrupt-names = "saradc_int";
		clocks = <0x09 0x02>;
		clock-names = "saradc_clk";
		resets = <0x09 0x56>;
		reg = <0x00 0xc1108680 0x00 0x30 0x00 0xc883c3d8 0x00 0x08>;
	};

	defendkey {
		compatible = "amlogic, defendkey";
		reg = <0x00 0xc8834500 0x00 0x04>;
		mem_size = <0x00 0x100000>;
		status = "okay";
	};

	spicc {
		compatible = "amlogic, spicc";
		status = "disabled";
		reg = <0x00 0xc1108d80 0x00 0x28>;
		resets = <0x09 0x08>;
		clocks = <0x09 0x0a>;
		clock-names = "spicc_clk";
		interrupts = <0x00 0x51 0x01>;
		device_id = <0x00>;
	};

	aliases {
		serial0 = "/serial@c81004c0";
		serial1 = "/serial@c11084c0";
		serial2 = "/serial@c11084dc";
		serial3 = "/serial@c1108700";
		serial4 = "/serial@c81004e0";
	};

	memory@00000000 {
		device_type = "memory";
		linux,usable-memory = <0x00 0x100000 0x00 0x7f000000>;
	};

	reserved-memory {
		#address-cells = <0x02>;
		#size-cells = <0x02>;
		ranges;

		linux,secmon {
			compatible = "amlogic, aml_secmon_memory";
			reg = <0x00 0x10000000 0x00 0x200000>;
			no-map;
			linux,phandle = <0x0a>;
			phandle = <0x0a>;
		};

		linux,secos {
			status = "disabled";
			compatible = "amlogic, aml_secos_memory";
			reg = <0x00 0x5300000 0x00 0x2000000>;
			no-map;
		};

		aml_pstore {
			compatible = "amlogic, pstore";
			reg = <0x00 0x7300000 0x00 0x100000>;
			no-map;
		};

		linux,secchk {
			compatible = "shared-dma-pool";
			status = "disabled";
			reusable;
			size = <0x00 0x2000000>;
			alignment = <0x00 0x400000>;
			linux,contiguous-region;
		};

		linux,meson-fb {
			compatible = "shared-dma-pool";
			reusable;
			size = <0x00 0x2400000>;
			alignment = <0x00 0x40000>;
			alloc-ranges = <0x00 0x3dc00000 0x00 0x2400000>;
			linux,phandle = <0x1d>;
			phandle = <0x1d>;
		};

		linux,di_cma {
			compatible = "shared-dma-pool";
			reusable;
			size = <0x00 0x2800000>;
			alignment = <0x00 0x400000>;
			linux,phandle = <0x25>;
			phandle = <0x25>;
		};

		linux,ion-dev {
			compatible = "amlogic, idev-mem";
			size = <0x00 0x1000>;
			linux,phandle = <0x21>;
			phandle = <0x21>;
		};

		linux,vdin1_cma {
			compatible = "shared-dma-pool";
			linux,phandle = <0x06>;
			reusable;
			size = <0x00 0x1400000>;
			alignment = <0x00 0x400000>;
		};

		linux,ppmgr {
			compatible = "shared-dma-pool";
			size = <0x00 0x00>;
			linux,phandle = <0x23>;
			phandle = <0x23>;
		};

		linux,amlvideo2 {
			compatible = "shared-dma-pool";
			reusable;
			size = <0x00 0x00>;
			alignment = <0x00 0x400000>;
			linux,phandle = <0x24>;
			phandle = <0x24>;
		};

		linux,hevc_cma {
			compatible = "shared-dma-pool";
			linux,phandle = <0x01>;
			reusable;
			size = <0x00 0x00>;
			alignment = <0x00 0x400000>;
			linux,contiguous-region;
		};

		linux,codec_mm_cma {
			compatible = "shared-dma-pool";
			reusable;
			size = <0x00 0x1f400000>;
			alignment = <0x00 0x400000>;
			linux,contiguous-region;
			linux,phandle = <0x1e>;
			phandle = <0x1e>;
		};

		linux,picdec {
			compatible = "shared-dma-pool";
			reusable;
			size = <0x00 0x00>;
			alignment = <0x00 0x00>;
			linux,contiguous-region;
			linux,phandle = <0x22>;
			phandle = <0x22>;
		};

		linux,codec_mm_reserved {
			compatible = "amlogic, codec-mm-reserved";
			size = <0x00 0x1000>;
			alignment = <0x00 0x100000>;
			linux,phandle = <0x1f>;
			phandle = <0x1f>;
		};
	};

	meson-pwm {
		compatible = "amlogic, meson-pwm";
		status = "disabled";
		#pwm-cells = <0x02>;
		pwm-outputs = <0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07>;
		pwm-outputs-new = <0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 0x09 0x0a 0x0b 0x0c 0x0d 0x0e 0x0f>;
		reg = <0x00 0xc1108550 0x00 0x30 0x00 0xc8100550 0x00 0x10>;
		clocks = <0x09 0x02 0x09 0x05 0x09 0x09 0x09 0x08>;
		clock-names = "xtal\0vid_pll_clk\0fclk_div4\0fclk_div3";
		clock-select = <0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00>;
		clock-select-new = <0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00>;
		linux,phandle = <0x1b>;
		phandle = <0x1b>;
	};

	pwmled {
		compatible = "amlogic, pwmled";
		dev_name = "pwmled";
		status = "disabled";
		pwms = <0x1b 0x06 0x989680>;
		polarity = <0x01>;
		max_brightness = <0xff>;
		pinctrl-names = "pwm_ao_a_pins";
		pinctrl-0 = <0x1c>;
		expires = <0x190>;
		expires_count = <0x08>;
	};

	meson-vout {
		compatible = "amlogic, meson-vout";
		dev_name = "meson-vout";
		status = "okay";
	};

	meson-fb {
		compatible = "amlogic, meson-fb";
		memory-region = <0x1d>;
		dev_name = "meson-fb";
		status = "okay";
		interrupts = <0x00 0x03 0x01 0x00 0x59 0x01>;
		interrupt-names = "viu-vsync\0rdma";
		mem_size = <0x800000 0x1800000 0x100000>;
		display_mode_default = "1080p60hz";
		scale_mode = <0x01>;
		display_size_default = <0x780 0x438 0x780 0xca8 0x20>;
		logo_addr = "0x3dc00000";
	};

	ge2d {
		compatible = "amlogic, ge2d";
		dev_name = "ge2d";
		status = "okay";
		interrupts = <0x00 0x96 0x01>;
		interrupt-names = "ge2d";
		clocks = <0x09 0x17 0x09 0x19>;
		clock-names = "clk_vapb_0\0clk_ge2d";
		resets = <0x09 0x34>;
		reset-names = "ge2d";
	};

	codec_io {
		compatible = "amlogic, codec_io";
		#address-cells = <0x02>;
		#size-cells = <0x02>;
		ranges;

		io_cbus_base {
			reg = <0x00 0xc1100000 0x00 0x100000>;
		};

		io_dos_base {
			reg = <0x00 0xc8820000 0x00 0x10000>;
		};

		io_hiubus_base {
			reg = <0x00 0xc883c000 0x00 0x2000>;
		};

		io_aobus_base {
			reg = <0x00 0xc8100000 0x00 0x100000>;
		};

		io_vcbus_base {
			reg = <0x00 0xd0100000 0x00 0x40000>;
		};

		io_dmc_base {
			reg = <0x00 0xc8838000 0x00 0x400>;
		};
	};

	codec_mm {
		compatible = "amlogic, codec, mm";
		memory-region = <0x1e 0x1f>;
		dev_name = "codec_mm";
		status = "okay";
	};

	ethernet@0xc9410000 {
		compatible = "amlogic, gxbb-rmii-dwmac";
		reg = <0x00 0xc9410000 0x00 0x10000 0x00 0xc8834540 0x00 0x08 0x00 0xc8834558 0x00 0x0c>;
		interrupts = <0x00 0x08 0x01 0x00 0x09 0x01>;
		phy-mode = "rmii";
		pinctrl-names = "eth_pins";
		pinctrl-0 = <0x20>;
		mc_val = <0x1800>;
		resets = <0x09 0x23>;
		reset-names = "ethpower";
		interrupt-names = "macirq\0phyirq";
		clocks = <0x09 0x0a>;
		clock-names = "ethclk81";
		internal_phy = <0x01>;
	};

	mesonstream {
		compatible = "amlogic, codec, streambuf";
		dev_name = "mesonstream";
		status = "okay";
		resets = <0x09 0x39 0x09 0x59 0x09 0x24 0x09 0x01>;
		reset-names = "parser_top\0vpu_intr\0demux\0vdec";
	};

	amvideocap {
		compatible = "amlogic, amvideocap";
		dev_name = "amvideocap.0";
		status = "okay";
		max_size = <0x08>;
	};

	ion_dev {
		compatible = "amlogic, ion_dev";
		memory-region = <0x21>;
	};

	vdec {
		compatible = "amlogic, vdec";
		dev_name = "vdec.0";
		status = "okay";
		interrupts = <0x00 0x03 0x01 0x00 0x17 0x01 0x00 0x20 0x01 0x00 0x2b 0x01 0x00 0x2c 0x01 0x00 0x2d 0x01>;
		interrupt-names = "vsync\0demux\0parser\0mailbox_0\0mailbox_1\0mailbox_2";
	};

	picdec {
		compatible = "amlogic, picdec";
		memory-region = <0x22>;
		dev_name = "picdec";
		status = "okay";
	};

	ppmgr {
		compatible = "amlogic, ppmgr";
		memory-region = <0x23>;
		dev_name = "ppmgr";
		status = "okay";
	};

	amlvideo2 {
		compatible = "amlogic, amlvideo2";
		memory-region = <0x24>;
		dev_name = "amlvideo2";
		status = "okay";
	};

	deinterlace {
		compatible = "amlogic, deinterlace";
		status = "okay";
		flag_cma = <0x02>;
		memory-region = <0x25>;
		interrupts = <0x00 0x2e 0x01 0x00 0x06 0x01>;
		interrupt-names = "de_irq\0timerc";
		buffer-size = <0x3e2c40>;
		nr10bit-surpport = <0x01>;
		hw-version = <0x02>;
	};

	vdin0 {
		compatible = "amlogic, vdin";
		dev_name = "vdin0";
		status = "okay";
		reserve-iomap = "true";
		flag_cma = <0x01>;
		cma_size = <0x18>;
		interrupts = <0x00 0x53 0x01>;
		rdma-irq = <0x02>;
		clocks = <0x09 0x11 0x09 0x29>;
		clock-names = "fclk_div5\0cts_vdin_meas_clk";
		vdin_id = <0x00>;
		tv_bit_mode = <0x15>;
	};

	vdin1 {
		compatible = "amlogic, vdin";
		memory-region = <0x06>;
		dev_name = "vdin1";
		status = "okay";
		reserve-iomap = "true";
		flag_cma = <0x00>;
		interrupts = <0x00 0x55 0x01>;
		rdma-irq = <0x04>;
		clocks = <0x09 0x11 0x09 0x29>;
		clock-names = "fclk_div5\0cts_vdin_meas_clk";
		vdin_id = <0x01>;
	};

	amvdec_656in0 {
		compatible = "amlogic, amvdec_656in";
		dev_name = "amvdec_656in0";
		status = "ok";
		reg = <0x00 0xd0048000 0x00 0x7c>;
		clocks = <0x09 0x07 0x09 0x26>;
		clock-names = "fclk_div2\0cts_bt656_clk0";
		bt656_id = <0x00>;
	};

	amvdec_656in1 {
		compatible = "amlogic, amvdec_656in";
		dev_name = "amvdec_656in1";
		status = "ok";
		reg = <0x00 0xd0050000 0x00 0x7c>;
		clocks = <0x09 0x07 0x09 0x27>;
		clock-names = "fclk_div2\0cts_bt656_clk1";
		bt656_id = <0x01>;
	};

	amlvecm {
		compatible = "amlogic, vecm";
		dev_name = "aml_vecm";
		status = "okay";
		gamma_en = <0x00>;
		wb_en = <0x00>;
		cm_en = <0x00>;
	};

	amvenc_avc {
		compatible = "amlogic, amvenc_avc";
		dev_name = "amvenc_avc";
		status = "okay";
		interrupts = <0x00 0x2d 0x01>;
		interrupt-names = "mailbox_2";
	};

	hevc_enc {
		compatible = "cnm, HevcEnc";
		memory-region = <0x01>;
		dev_name = "HevcEnc";
		status = "okay";
		interrupts = <0x00 0xbb 0x01>;
		interrupt-names = "wave420l_irq";
		#address-cells = <0x02>;
		#size-cells = <0x02>;
		ranges;

		io_reg_base {
			reg = <0x00 0xc8810000 0x00 0x4000>;
		};
	};

	vpu {
		compatible = "amlogic, vpu";
		dev_name = "vpu";
		status = "ok";
		clk_level = <0x07>;
	};

	bt-dev {
		compatible = "amlogic, bt-dev";
		dev_name = "bt-dev";
		status = "okay";
		gpio_reset = <0x1a 0x60 0x00>;
	};

	rtc {
		compatible = "amlogic, aml_vrtc";
		alarm_reg_addr = <0xc81000a8>;
		timer_e_addr = <0xc1109988>;
		init_date = "2015/01/01";
		status = "okay";
	};

	wifi {
		compatible = "amlogic, aml_wifi";
		dev_name = "aml_wifi";
		status = "okay";
		interrupt_pin = <0x1a 0x61 0x00>;
		interrupts = <0x00 0x44 0x04>;
		irq_trigger_type = "GPIO_IRQ_HIGH";
		power_on_pin = <0x1a 0x55 0x00>;
		dhd_static_buf;
		pinctrl-names = "wifi_32k_pins";
		pinctrl-0 = <0x26>;
	};

	emmc {
		compatible = "amlogic, aml_sd_emmc";
		dev_name = "aml_newsd.0";
		status = "okay";
		reg = <0x00 0xd0074000 0x00 0x2000>;
		interrupts = <0x00 0xda 0x01>;
		pinctrl-names = "emmc_clk_cmd_pins\0emmc_all_pins";
		pinctrl-0 = <0x27>;
		pinctrl-1 = <0x28 0x29 0x2a>;

		emmc {
			status = "disabled";
			pinname = "emmc";
			ocr_avail = <0x200080>;
			caps = "MMC_CAP_8_BIT_DATA\0MMC_CAP_MMC_HIGHSPEED\0MMC_CAP_SD_HIGHSPEED\0MMC_CAP_NONREMOVABLE\0MMC_CAP_1_8V_DDR\0MMC_CAP_HW_RESET\0MMC_CAP_ERASE\0MMC_CAP_CMD23";
			f_min = <0x493e0>;
			f_max = <0x2faf080>;
			tx_phase = <0x00>;
			max_req_size = <0x20000>;
			gpio_dat3 = <0x1a 0x1d 0x00>;
			hw_reset = <0x1a 0x23 0x00>;
			card_type = <0x01>;
		};
	};

	sd {
		compatible = "amlogic, aml_sd_emmc";
		dev_name = "aml_newsd.0";
		status = "okay";
		reg = <0x00 0xd0072000 0x00 0x2000>;
		interrupts = <0x00 0xd9 0x01 0x00 0x43 0x01 0x00 0x45 0x01>;
		pinctrl-names = "sd_clk_cmd_pins\0sd_all_pins\0sd_1bit_pins\0sd_clk_cmd_uart_pins\0sd_1bit_uart_pins\0sd_to_ao_uart_pins\0ao_to_sd_uart_pins\0ao_to_sd_jtag_pins\0sd_to_ao_jtag_pins\0sd_clear_all_pin";
		pinctrl-0 = <0x2b>;
		pinctrl-1 = <0x2c>;
		pinctrl-2 = <0x2d>;
		pinctrl-3 = <0x2e>;
		pinctrl-4 = <0x2f>;
		pinctrl-5 = <0x30>;
		pinctrl-6 = <0x31>;
		pinctrl-7 = <0x32>;
		pinctrl-8 = <0x33>;
		pinctrl-9 = <0x34>;

		sd {
			status = "okay";
			pinname = "sd";
			ocr_avail = <0x200080>;
			caps = "MMC_CAP_4_BIT_DATA\0MMC_CAP_MMC_HIGHSPEED\0MMC_CAP_SD_HIGHSPEED";
			f_min = <0x61a80>;
			f_max = <0x5f5e100>;
			max_req_size = <0x20000>;
			gpio_card5 = <0x1a 0x2f 0x00>;
			gpio_dat3 = <0x1a 0x2e 0x00>;
			gpio_card3 = <0x1a 0x2d 0x00>;
			gpio_card2 = <0x1a 0x2c 0x00>;
			gpio_card1 = <0x1a 0x2b 0x00>;
			jtag_pin = <0x1a 0x2a 0x00>;
			gpio_cd = <0x1a 0x30 0x00>;
			irq_in = <0x03>;
			irq_out = <0x05>;
			card_type = <0x05>;
		};
	};

	sdio {
		compatible = "amlogic, aml_sd_emmc";
		dev_name = "aml_newsd.0";
		status = "okay";
		reg = <0x00 0xd0070000 0x00 0x2000>;
		interrupts = <0x00 0xd8 0x04>;
		pinctrl-names = "sdio_clk_cmd_pins\0sdio_all_pins";
		pinctrl-0 = <0x35>;
		pinctrl-1 = <0x36>;

		sdio {
			status = "okay";
			pinname = "sdio";
			ocr_avail = <0x200080>;
			caps = "MMC_CAP_4_BIT_DATA\0MMC_CAP_MMC_HIGHSPEED\0MMC_CAP_SD_HIGHSPEED\0MMC_CAP_NONREMOVABLE\0MMC_CAP_UHS_SDR12\0MMC_CAP_UHS_SDR25\0MMC_CAP_UHS_SDR50\0MMC_CAP_UHS_SDR104\0MMC_PM_KEEP_POWER\0MMC_CAP_SDIO_IRQ";
			f_min = <0x61a80>;
			f_max = <0x9f437c0>;
			tx_delay = <0x06>;
			max_req_size = <0x20000>;
			card_type = <0x03>;
		};
	};

	nand {
		compatible = "amlogic, aml_nand";
		dev_name = "nand";
		status = "okay";
		reg = <0x00 0xd0074800 0x00 0x200>;
		interrupts = <0x00 0x22 0x01>;
		pinctrl-names = "nand_rb_mod\0nand_norb_mod\0nand_cs_pins_only";
		pinctrl-0 = <0x37 0x38 0x39>;
		pinctrl-1 = <0x37 0x38 0x39>;
		pinctrl-2 = <0x3a>;
		device_id = <0x00>;
		plat-names = "nandnormal";
		plat-num = <0x01>;
		plat-part-0 = <0x3b>;

		normal {
			enable_pad = "ce0\0ce1\0ce2\0ce3";
			busy_pad = "rb0";
			linux,phandle = <0x3b>;
			phandle = <0x3b>;
		};
	};

	aml_nftl {
		compatible = "amlogic, nftl";
	};

	partitions {
		parts = <0x0e>;
		part-0 = <0x3c>;
		part-1 = <0x3d>;
		part-2 = <0x3e>;
		part-3 = <0x3f>;
		part-4 = <0x40>;
		part-5 = <0x41>;
		part-6 = <0x42>;
		part-7 = <0x43>;
		part-8 = <0x44>;
		part-9 = <0x45>;
		part-10 = <0x46>;
		part-11 = <0x47>;
		part-12 = <0x48>;
		part-13 = <0x49>;

		logo {
			pname = "logo";
			size = <0x00 0x2000000>;
			mask = <0x01>;
			linux,phandle = <0x3c>;
			phandle = <0x3c>;
		};

		recovery {
			pname = "recovery";
			size = <0x00 0x2000000>;
			mask = <0x01>;
			linux,phandle = <0x3d>;
			phandle = <0x3d>;
		};

		rsv {
			pname = "rsv";
			size = <0x00 0x800000>;
			mask = <0x01>;
			linux,phandle = <0x3e>;
			phandle = <0x3e>;
		};

		tee {
			pname = "tee";
			size = <0x00 0x800000>;
			mask = <0x01>;
			linux,phandle = <0x3f>;
			phandle = <0x3f>;
		};

		crypt {
			pname = "crypt";
			size = <0x00 0x2000000>;
			mask = <0x01>;
			linux,phandle = <0x40>;
			phandle = <0x40>;
		};

		misc {
			pname = "misc";
			size = <0x00 0x2000000>;
			mask = <0x01>;
			linux,phandle = <0x41>;
			phandle = <0x41>;
		};

		BootFiles {
			pname = "BootFiles";
			size = <0x00 0x20000000>;
			mask = <0x01>;
			linux,phandle = <0x42>;
			phandle = <0x42>;
		};

		boot {
			pname = "boot";
			size = <0x00 0x2000000>;
			mask = <0x01>;
			linux,phandle = <0x43>;
			phandle = <0x43>;
		};

		system {
			pname = "system";
			size = <0x00 0x32000000>;
			mask = <0x01>;
			linux,phandle = <0x44>;
			phandle = <0x44>;
		};

		cache {
			pname = "cache";
			size = <0x00 0x20000000>;
			mask = <0x02>;
			linux,phandle = <0x45>;
			phandle = <0x45>;
		};

		ghost {
			pname = "ghost";
			size = <0x00 0x32000000>;
			mask = <0x02>;
			linux,phandle = <0x46>;
			phandle = <0x46>;
		};

		info {
			pname = "info";
			size = <0x00 0x4000000>;
			mask = <0x02>;
			linux,phandle = <0x47>;
			phandle = <0x47>;
		};

		params {
			pname = "params";
			size = <0x00 0x4000000>;
			mask = <0x02>;
			linux,phandle = <0x48>;
			phandle = <0x48>;
		};

		data {
			pname = "data";
			size = <0xffffffff 0xffffffff>;
			mask = <0x04>;
			linux,phandle = <0x49>;
			phandle = <0x49>;
		};
	};

	unifykey {
		compatible = "amlogic, unifykey";
		status = "ok";
		unifykey-num = <0x0d>;
		unifykey-index-0 = <0x4a>;
		unifykey-index-1 = <0x4b>;
		unifykey-index-2 = <0x4c>;
		unifykey-index-3 = <0x4d>;
		unifykey-index-4 = <0x4e>;
		unifykey-index-5 = <0x4f>;
		unifykey-index-6 = <0x50>;
		unifykey-index-7 = <0x51>;
		unifykey-index-8 = <0x52>;
		unifykey-index-9 = <0x53>;
		unifykey-index-10 = <0x54>;
		unifykey-index-11 = <0x55>;
		unifykey-index-12 = <0x56>;

		key_0 {
			key-name = "usid";
			key-device = "normal";
			key-permit = "read\0write\0del";
			linux,phandle = <0x4a>;
			phandle = <0x4a>;
		};

		key_1 {
			key-name = "mac";
			key-device = "normal";
			key-permit = "read\0write\0del";
			linux,phandle = <0x4b>;
			phandle = <0x4b>;
		};

		key_2 {
			key-name = "hdcp";
			key-device = "secure";
			key-type = "sha1";
			key-permit = "read\0write\0del";
			linux,phandle = <0x4c>;
			phandle = <0x4c>;
		};

		key_3 {
			key-name = "secure_boot_set";
			key-device = "efuse";
			key-permit = "write";
			linux,phandle = <0x4d>;
			phandle = <0x4d>;
		};

		key_4 {
			key-name = "mac_bt";
			key-device = "normal";
			key-permit = "read\0write\0del";
			key-type = "mac";
			linux,phandle = <0x4e>;
			phandle = <0x4e>;
		};

		key_5 {
			key-name = "mac_wifi";
			key-device = "normal";
			key-permit = "read\0write\0del";
			key-type = "mac";
			linux,phandle = <0x4f>;
			phandle = <0x4f>;
		};

		key_6 {
			key-name = "hdcp2_tx";
			key-device = "normal";
			key-permit = "read\0write\0del";
			linux,phandle = <0x50>;
			phandle = <0x50>;
		};

		key_7 {
			key-name = "hdcp2_rx";
			key-device = "normal";
			key-permit = "read\0write\0del";
			linux,phandle = <0x51>;
			phandle = <0x51>;
		};

		key_8 {
			key-name = "widevinekeybox";
			key-device = "secure";
			key-type = "sha1";
			key-permit = "read\0write\0del";
			linux,phandle = <0x52>;
			phandle = <0x52>;
		};

		key_9 {
			key-name = "deviceid";
			key-device = "normal";
			key-permit = "read\0write\0del";
			linux,phandle = <0x53>;
			phandle = <0x53>;
		};

		key_10 {
			key-name = "hdcp22_fw_private";
			key-device = "secure";
			key-permit = "read\0write\0del";
			linux,phandle = <0x54>;
			phandle = <0x54>;
		};

		key_11 {
			key-name = "telecomkeybox";
			key-device = "secure";
			key-type = "raw";
			key-permit = "read\0write\0del";
			linux,phandle = <0x55>;
			phandle = <0x55>;
		};

		key_12 {
			key-name = "stbid";
			key-device = "normal";
			key-permit = "read\0write\0del";
			linux,phandle = <0x56>;
			phandle = <0x56>;
		};
	};

	tfsec {
		compatible = "amlogic, tfsec";
		tap_get_sn = <0xb000ff01>;
		tap_decrypt_cloud_challenge = <0xb000ff02>;
		tap_decrypt_terminal_challenge = <0xb000ff03>;
		tap_burn_in = <0xb000ff04>;
		tap_burn_sn = <0xb000ff05>;
		tap_burn_ci = <0xb000ff06>;
		tap_burn_mac = <0xb000ff07>;
		tap_get_mac = <0xb000ff08>;
		tap_get_ci = <0xb000ff09>;
		tap_query_in = <0xb000ff0a>;
	};

	amhdmitx {
		compatible = "amlogic, amhdmitx";
		dev_name = "amhdmitx";
		status = "okay";
		pinctrl-names = "hdmitx_hpd\0hdmitx_ddc";
		pinctrl-0 = <0x57>;
		pinctrl-1 = <0x58>;
		vend-data = <0x59>;
		interrupts = <0x00 0x39 0x01>;
		interrupt-names = "hdmitx_hpd";
		clocks = <0x09 0x0b 0x09 0x0c 0x09 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x16>;
		clock-names = "hdmitx_clk_sys\0hdmitx_clk_encp\0hdmitx_clk_enci\0hdmitx_clk_pixel\0hdmitx_clk_phy\0hdmitx_clk_vid";
		gpio_i2c_en = <0x01>;
		#address-cells = <0x02>;
		#size-cells = <0x02>;
		ranges;

		vend_data {
			compatible = "amlogic, amlogic-cec";
			status = "okay";
			vendor_name = "Amlogic";
			vendor_id = <0x00>;
			product_desc = "GXBB Mbox";
			cec_osd_string = "MBox";
			interrupts = <0x00 0xc7 0x01>;
			interrupt-names = "hdmitx_cec";
			pinctrl-names = "hdmitx_aocec";
			pinctrl-0 = <0x5a>;
			reg = <0x00 0xc810023c 0x00 0x04 0x00 0xc8100000 0x00 0x200>;
			linux,phandle = <0x59>;
			phandle = <0x59>;
		};
	};

	tvout {
		compatible = "amlogic, tvout";
		dev_name = "tvout";
		status = "okay";
	};

	i2c_gpio {
		compatible = "i2c-gpio";
		status = "okay";
		dev_name = "i2c-gpio";
		i2c-gpio,delay-us = <0x0a>;
		gpios = <0x1a 0x11 0x00 0x1a 0x12 0x00>;
		#address-cells = <0x02>;
		#size-cells = <0x02>;
		i2c-gpio,timeout-ms = <0x0a>;

		i2c_gpio_edid {
			compatible = "i2c-gpio-edid";
			reg = <0x50 0x00 0x00 0x00>;
		};
	};

	serial@c81004c0 {
		compatible = "amlogic, meson-uart";
		reg = <0x00 0xc81004c0 0x00 0x18>;
		interrupts = <0x00 0xc1 0x01>;
		status = "okay";
		clocks = <0x09 0x02>;
		clock-names = "clk_uart";
		xtal_tick_en = <0x01>;
		fifosize = <0x40>;
		pinctrl-names = "default";
		support-sysrq = <0x00>;
	};

	serial@c11084c0 {
		compatible = "amlogic, meson-uart";
		reg = <0x00 0xc11084c0 0x00 0x18>;
		interrupts = <0x00 0x1a 0x01>;
		status = "okay";
		clocks = <0x09 0x02>;
		clock-names = "clk_uart";
		fifosize = <0x80>;
		pinctrl-names = "default";
		pinctrl-0 = <0x5b>;
		resets = <0x09 0x0d>;
	};

	serial@c11084dc {
		compatible = "amlogic, meson-uart";
		reg = <0x00 0xc11084dc 0x00 0x18>;
		interrupts = <0x00 0x4b 0x01>;
		status = "disable";
		clocks = <0x09 0x02>;
		clock-names = "clk_uart";
		fifosize = <0x40>;
		pinctrl-names = "default";
		pinctrl-0 = <0x5c>;
		resets = <0x09 0x30>;
	};

	serial@c1108700 {
		compatible = "amlogic, meson-uart";
		reg = <0x00 0xc1108700 0x00 0x18>;
		interrupts = <0x00 0x5d 0x01>;
		status = "disable";
		clocks = <0x09 0x02>;
		clock-names = "clk_uart";
		fifosize = <0x40>;
		pinctrl-names = "default";
		pinctrl-0 = <0x5d>;
		resets = <0x09 0x4f>;
	};

	serial@c81004e0 {
		compatible = "amlogic, meson-uart";
		reg = <0x00 0xc81004e0 0x00 0x18>;
		interrupts = <0x00 0xc5 0x01>;
		status = "disable";
		clocks = <0x09 0x02>;
		clock-names = "clk_uart";
		fifosize = <0x40>;
		pinctrl-names = "default";
		pinctrl-0 = <0x5e>;
	};

	canvas {
		compatible = "amlogic, meson, canvas";
		dev_name = "amlogic-canvas";
		status = "ok";
		reg = <0x00 0xc8838000 0x00 0x400>;
	};

	rdma {
		compatible = "amlogic, meson, rdma";
		dev_name = "amlogic-rdma";
		status = "ok";
		interrupts = <0x00 0x59 0x01>;
		interrupt-names = "rdma";
	};

	dwc3@c9000000 {
		compatible = "synopsys, dwc3";
		reg = <0x00 0xc9000000 0x00 0x100000>;
		interrupts = <0x00 0x1e 0x04>;
		usb-phy = <0x5f 0x60>;
		cpu-type = "gxl";
		clock-src = "usb3.0";
	};

	usb2phy@d0078000 {
		compatible = "amlogic, amlogic-new-usb2";
		portnum = <0x02>;
		reg = <0x00 0xd0078000 0x00 0x80>;
		linux,phandle = <0x5f>;
		phandle = <0x5f>;
	};

	usb3phy@d0078080 {
		compatible = "amlogic, amlogic-new-usb3";
		portnum = <0x00>;
		reg = <0x00 0xd0078080 0x00 0x20>;
		linux,phandle = <0x60>;
		phandle = <0x60>;
	};

	dwc2_a {
		compatible = "amlogic,dwc2";
		device_name = "dwc2_a";
		reg = <0x00 0xc9100000 0x00 0x40000>;
		status = "okay";
		interrupts = <0x00 0x1f 0x04>;
		pl-periph-id = <0x00>;
		clock-src = "usb0";
		port-id = <0x00>;
		port-type = <0x02>;
		port-speed = <0x00>;
		port-config = <0x00>;
		port-dma = <0x00>;
		port-id-mode = <0x00>;
		usb-fifo = <0x2d8>;
		cpu-type = "gxl";
		controller-type = <0x01>;
		phy-reg = <0xd0078000>;
		phy-reg-size = <0xa0>;
		resets = <0x09 0x3a 0x09 0x48 0x09 0x36>;
		reset-names = "usb_general\0usb1\0usb1_to_ddr";
	};

	I2S {
		#sound-dai-cells = <0x00>;
		resets = <0x09 0x26 0x09 0x12 0x09 0x28 0x09 0x29 0x09 0x2a 0x09 0x2b 0x09 0x2c 0x09 0x2d 0x09 0x2f 0x09 0x8e 0x09 0x22>;
		reset-names = "top_glue\0aud_buf\0i2s_out\0amclk_measure\0aififo2\0aud_mixer\0mixer_reg\0adc\0top_level\0aoclk\0aud_in";
		clocks = <0x09 0x1f 0x09 0x22>;
		clock-names = "mpll0\0mclk";
		compatible = "amlogic, aml-i2s-dai";
		linux,phandle = <0x6c>;
		phandle = <0x6c>;
	};

	SPDIF {
		#sound-dai-cells = <0x00>;
		compatible = "amlogic, aml-spdif-dai";
		resets = <0x09 0x27 0x09 0x90>;
		reset-names = "iec958\0iec958_amclk";
		clocks = <0x09 0x20 0x09 0x24 0x09 0x22 0x09 0x25 0x09 0x0a>;
		clock-names = "mpll1\0i958\0mclk\0spdif\0clk_81";
		linux,phandle = <0x6d>;
		phandle = <0x6d>;
	};

	PCM {
		#sound-dai-cells = <0x00>;
		compatible = "amlogic, aml-pcm-dai";
		pinctrl-names = "aml_audio_btpcm";
		pinctrl-0 = <0x61>;
		linux,phandle = <0x6e>;
		phandle = <0x6e>;
	};

	i2s_platform {
		compatible = "amlogic, aml-i2s";
		interrupts = <0x00 0x30 0x01 0x00 0x1d 0x01>;
		linux,phandle = <0x6a>;
		phandle = <0x6a>;
	};

	pcm_platform {
		compatible = "amlogic, aml-pcm";
		linux,phandle = <0x6b>;
		phandle = <0x6b>;
	};

	spdif_codec {
		#sound-dai-cells = <0x00>;
		compatible = "amlogic, aml-spdif-codec";
		pinctrl-names = "aml_audio_spdif";
		pinctrl-0 = <0x62>;
		linux,phandle = <0x70>;
		phandle = <0x70>;
	};

	pcm_codec {
		#sound-dai-cells = <0x00>;
		compatible = "amlogic, pcm2BT-codec";
		linux,phandle = <0x71>;
		phandle = <0x71>;
	};

	dummy {
		#sound-dai-cells = <0x00>;
		compatible = "amlogic, aml_dummy_codec";
		status = "disable";
	};

	t9015 {
		#sound-dai-cells = <0x00>;
		compatible = "amlogic, aml_codec_T9015";
		reg = <0x00 0xc8832000 0x00 0x14>;
		status = "okay";
		linux,phandle = <0x6f>;
		phandle = <0x6f>;
	};

	aml_m8_snd {
		compatible = "aml, aml_snd_m8";
		status = "okay";
		aml-sound-card,format = "i2s";
		aml_sound_card,name = "AML-M8AUDIO";
		aml,audio-routing = "Ext Spk\0LOUTL\0Ext Spk\0LOUTR";
		mute_gpio-gpios = <0x1a 0x15 0x00>;
		mute_inv;
		hp_disable;
		sleep_time = <0x12c>;
		hp_paraments = <0x320 0x12c 0x00 0x05 0x01>;
		pinctrl-names = "aml_snd_m8";
		pinctrl-0 = <0x63>;
		cpu_list = <0x64 0x65 0x66>;
		codec_list = <0x67 0x68 0x69>;
		plat_list = <0x6a 0x6a 0x6b>;

		cpudai0 {
			sound-dai = <0x6c>;
			linux,phandle = <0x64>;
			phandle = <0x64>;
		};

		cpudai1 {
			sound-dai = <0x6d>;
			linux,phandle = <0x65>;
			phandle = <0x65>;
		};

		cpudai2 {
			sound-dai = <0x6e>;
			linux,phandle = <0x66>;
			phandle = <0x66>;
		};

		codec0 {
			sound-dai = <0x6f>;
			linux,phandle = <0x67>;
			phandle = <0x67>;
		};

		codec1 {
			sound-dai = <0x70>;
			linux,phandle = <0x68>;
			phandle = <0x68>;
		};

		codec2 {
			sound-dai = <0x71>;
			linux,phandle = <0x69>;
			phandle = <0x69>;
		};
	};

	ledlight {
		compatible = "amlogic, ledlight";
		dev_name = "ledlight";
		status = "okay";
		power_gpio_0 = <0x72>;
		ir_gpio_0 = <0x73>;

		gpio_rg {
			led_name = "power_led";
			led_gpio = <0x1a 0x49 0x00>;
			led_active = <0x01>;
			led_type = "R&G";
			linux,phandle = <0x72>;
			phandle = <0x72>;
		};

		gpio_b {
			led_name = "ir_led";
			led_gpio = <0x1a 0x49 0x00>;
			led_active = <0x00>;
			led_type = "B";
			linux,phandle = <0x73>;
			phandle = <0x73>;
		};
	};

	amlogic_thermals {
		compatible = "amlogic, amlogic-thermal";
		#thermal-cells = <0x07>;
		dev_name = "aml_thermal";
		status = "okay";
		trip_point = <0x46 0x177001 0x177001 0x1ff 0x1ff 0x03 0x02 0x50 0x13c681 0x13c681 0x1b3 0x1b3 0x02 0x01 0x5a 0xfbf41 0xfbf41 0x148 0x148 0x02 0x01 0x104 0xffffffff 0xffffffff 0xffffffff 0xffffffff 0xffffffff 0xffffffff>;
		cpu_cali_a = <0x00>;
		idle_interval = <0x3e8>;
		keep_mode;
		keep_mode_threshold = <0x55>;
		keep_mode_max_range = <0x1ec300 0x29a 0x04 0x02>;
		keep_mode_min_range = <0xf4240 0x190 0x02 0x01 0xa2d78 0x190 0x01 0x01>;
	};
};